Self-Aligning Ball Bearings
The raceway of the outer ring is a spherical surface, and its curvature center is consistent with the center of the bearing. Therefore, the inner ring, ball, and cage can rotate freely around the center of the bearing, and have self-aligning properties. It is suitable for transmission shafts where it is difficult to align the shaft and the housing, and the shaft is prone to deflection. Because the contact angle is small, the axial load capacity is also small. Generally, a stamped cage is used.
The allowable self-aligning angle of the self-aligning ball bearing is about 0.07 to 0.12 radians (4-7 degrees) under normal load conditions. Depending on the relevant installation dimensions around the bearing, there are also special cases where this self-aligning angle cannot be achieved, so please pay attention.
The allowable self-aligning angle of the self-aligning ball bearing is about 0.07 to 0.12 radians (4-7 degrees) under normal load conditions. Depending on the relevant installation dimensions around the bearing, there are also special cases where this self-aligning angle cannot be achieved, so please pay attention.
Classification:
Ball Bearings
Self-Aligning Ball Bearings
Address: 266 Guanhenan Road, Shengzhou City, Zhejiang Province