Blog

Blog

Three methods to find SKF bearing faults

Release time:

2024-12-05 10:44

SKF bearings may have one or another fault during operation. After the fault occurs, we need to find out the cause of the fault to prevent similar faults from happening again in the future. So what are the methods for finding faults after a fault? Let's take a look at them together.

SKF bearings may have one or another fault during operation. After the fault occurs, we need to find out the cause of the fault to prevent similar faults from happening again in the future. So what are the methods for finding faults after a fault? Let's take a look at them together.
Generally speaking, the inspection and diagnosis of bearing faults can be divided into three methods: sensory, partition, and comparison. We need to use them flexibly according to the actual situation and use the most suitable method to find the cause of the fault.

First, sensory method: use eyes, ears, nose, hands, etc. to feel the machine and find out the approximate location of the fault.
Second, partition method: temporarily isolate a certain part of the SKF bearing from working, pay attention to the changes in the fault signs, and find out the location of the fault.
Third, comparison method: suspect that a certain component has a problem, replace the suspected component with a good one, and compare and diagnose the fault.

Previous

FAG imported bearing seat seal failure reasons and improvement solutions

None

Next

Popularization of professional knowledge on disassembly and assembly methods for routine maintenance of imported bearings

Popularization of professional knowledge on disassembly and assembly methods for routine maintenance of imported bearings

The disassembly and assembly of imported bearings is carried out during regular inspections and replacement of bearings. After disassembly, if the bearing is used again or the condition of the bearing needs to be checked, its disassembly and installation should be the same as before. Pay attention to the fact that the bearing parts are not damaged, especially the difficulty of the replacement operation of the bearing assembly.

2024/12/05

FAG imported bearing seat seal failure reasons and improvement solutions

FAG imported bearing seat seal failure reasons and improvement solutions

The FAG imported bearing seat seal improvement plan "multi-stage pressure relief sealing technology" experimental bearing seat seal ring can reduce the lubricating oil leakage by reducing the pressure difference at both ends of the seal in a working environment without large-scale disassembly such as shaft extraction, and at the same time, the residual leaked lubricating oil flows back to the oil tank to achieve the purpose of shaft seal leakage prevention.

2024/12/05

Three methods to find SKF bearing faults

Three methods to find SKF bearing faults

SKF bearings may have one or another fault during operation. After the fault occurs, we need to find out the cause of the fault to prevent similar faults from happening again in the future. So what are the methods for finding faults after a fault? Let's take a look at them together.

2024/12/05